| Model |
KL300T |
| Applicable fibers |
SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) |
| Fiber cleaved length |
12~16mm（Coating diameter：250μm）
16mm（Coating diameter: 250 ~ 1000μm） |
| Fiber diameter |
Cladding diameter：80 ~150μm
Coating diameter：100~ 1000μm |
| Fiber Count |
Single |
| Fiber aligning method |
Core or clad aligning |
| Image processing method |
Digital |
| Actual average splice loss |
0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS) |
| Splicing time |
Typical 9 sec，with standard SM fiber |
| Splicing mode |
53(templet), 40(user) |
| Splice loss estimate |
More accurate |
| Return loss |
＞60dB |
| Storage of splice result |
4000 results，20 parameter per result |
| Fiber display and magnification |
300X（X or Y view）,150X（X and Y view） |
| Tube heating time |
Typical 30 sec |
| Tube heating mode |
9(templet), 24(user) |
| Tube heating temperature |
Can be adjusted |
Applicable Protection
sleeve length |
60mm, 40mm and a series of micro sleeves |
| Tension test |
2N |
| Electrode life |
2500 |
| No.of splice/heating with battery |
Typical 130 cycles (splice/tube heat) with inner Li-battery |
| Display screen |
5.6 TFT inch color LCD monitor |
| Image change over |
The fiber image is turned upside down |
| Terminals |
USB 1.1 and VGA |
| Operating condition |
0 ~ 5000m above sea level, 0 ~ 95%RH and -10～50℃, respectively, Max. wind velocity of 15m/s |
| Power supply |
AC 100-240V with AC adapter; inner Li-battery(6600mAH) |
| Dimensions |
150mm(L) x150mm (W) x150mm (H) |
| Weight |
2.7 Kg excluding battery,3.2 Kg including battery |
